What is the structure and performance of the turn-over nursing bed?

TIME：

2023-08-30

Turn-over nursing beds can help patients sit up on their sides, bend their lower limbs, and relieve edema. It is suitable for self-care and rehabilitation of various bedridden patients, and can reduce the nursing intensity of medical staff. It is a new type of multifunctional nursing instrument.

The main structure and performance of the turn-over nursing bed are as follows:

1. Electric flip

A stack of flip frame assemblies is installed on the left and right sides of the bed board. After the motor is running, the turning frame can be slowly raised and lowered on the left and right sides through slow transmission. The roll-over strap is installed on the roll-over frame. Through the function of the tumbling belt, the human body can roll at any angle within the range of 0-80 °, thereby changing the compressed parts of the body and providing ideal nursing and treatment posture.

2, turn over nursing bed to get up

A pair of lifting arms is provided below the bed board. After the motor is running, it drives the rising shaft to rotate, so that the arms at both ends of the shaft can move in an arc, so that the bed board can rise and fall at will within the range of 0 ° ~ 80 °, and help the patient to complete sit-ups.

3. Electric-assisted lower limb flexion and extension

A pair of bending and stretching folding pads are fixed on the left and right of the lower bed board, and a pair of sliding rollers are installed on the left and right of the lower end to make the folding pads flexible and light. After the motor runs, it drives the extension and flexion shaft to rotate, so that the wire rope fixed on the shaft is rolled up under the cooperation of the tension spring, and the arc-shaped lifting rod moves up and down, thereby completing the extension and flexion of the employee's lower limbs. It can be stopped and started at will in the height range of 0~280mm to meet the purpose of exercise and recovery of lower limb function.

4. Structure of defecation

The hip of the lower bed board has a rectangular hole with a cover plate, a drawstring is embedded in the cover plate, and a toilet bowl is located at the lower part of the cover plate. The track welded to the bed frame tightly combines the upper hole of the toilet with the cover plate on the lower bed plate. The patient can control the electric leg bending button to get up, adjust the position of the bed, and then pull the cover to complete the bed-wetting process.

5. Activity table

There is a feeling table in the middle of the bed frame. Usually, the table top and the end of the bed are one piece. When in use, the table can be pulled up, and the patient can get up with the help of electricity, and then write, read, eat and other activities.

6. Seat function

The front end of the bed can naturally rise and the back end can naturally fall. The whole bed body becomes a seat, which can meet the leisure needs of the elderly such as sitting and resting, even reading books and watching TV (ordinary nursing beds do not have this function).

7. Shampoo function

The old man had his own shampoo basin under his head when he was lying flat. After removing the pillow, the shampoo basin will be freely exposed. The old man can lie on the bed and wash his hair without moving.

8, sitting foot washing function

A footbath is provided at the bottom of the bed to lift the front of the bed and sink the back of the bed. After the elderly sit up, their calves can sag naturally, which can help them wash their feet easily (equivalent to sitting on a chair), effectively avoid the inconvenience of washing their feet while lying down, and allow them to soak their feet for a long time (common nursing beds do not have this function).

9. Wheelchair function

The patient can sit up at any angle from 0 to 90 degrees. Patients are often sat up to prevent tissue shrinkage and reduce edema. Contribute to the recovery of activity. After the patient sits up.

What are the benefits of a nursing bed at home?

The use method of turning over nursing bed is introduced, come and collect!

From May 14 to 17, the 87th CMEF Medical Devices Exhibition was held at the National Convention and Exhibition Center (Shanghai). Zhejiang Medster Medical Device Technology Co., Ltd. was invited to participate in the CMEF medical device exhibition. At this exhibition, two absolutely innovative products of Medster Medical Device Technology Co., Ltd., "Suitable for Old Bed" and "Ergonomic Wheelchair", made their debut, which attracted wide attention and praise.

Zhejiang Medster Medical Device Technology Co., Ltd. was established in 2022. It is a comprehensive enterprise integrating the research and development, production and sales of rehabilitation aids and medical device products. It has registered branches in Hengshui, Hangzhou, and Shenzhen. Responsible for the company's brand operation, product development, sales and after-sales service business. The company's main products include rehabilitation nursing beds, medical beds, manual electric wheelchairs, anti-bedsore air mattresses, atomizers, breathing masks and masks. The company has successively obtained the registration certificates of electric hospital beds, rehabilitation nursing beds, wheelchairs, anti-decubitus air mattresses, atomizers, breathing masks and other products. Its subsidiary Hebei Ruilangde Medical Equipment Group Co., Ltd. is a national smart health elderly care application pilot demonstration enterprise, a national e-commerce demonstration enterprise, a member unit of China Rehabilitation Aids Association, a Hebei Province Rehabilitation Aids Application Demonstration Unit, and Hebei Medical Equipment Vice President Unit of the Association, Hebei Welfare Foundation Love Enterprise.

Since its inception, the company has adhered to the principle of "quality for survival, innovation and development"

A comprehensive enterprise integrating R & D, production and sales of rehabilitation aids and medical equipment products.

Medster's global layout has been effective, with overseas business breaking tens of millions in 2 days.

Recently, Zhejiang Medster Medical Device Technology Co., Ltd. released sales data for overseas markets during the membership day event. Data show that during the membership day, sales exceeded 10 million in two days, an increase of 150 percent over the same period last year; among them, the export sales of star products represented by the Medster medical sector increased by 264 percent compared with the same period last year, and the export sales of star products represented by the maidesite lifting table series increased by 145 percent compared with the same period last year. Judging from the data, Medster's product potential has begun to be gradually released overseas.

Nursing bed installation steps is what?

Nursing bed installation steps is what? 1. The nursing bed casters are equipped with two brake brakes, and the two casters with brake brakes are installed diagonally in the screw holes on the bed legs of the bed frame; then the remaining two casters are installed on the other two base legs In the screw hole. 2. Installation of the rear bed surface: connect the rear bed surface with the bed frame with the rear frame pin, and then lock the pin with the split pin. 3. Installation of the head of the nursing bed: align the head of the bed with the holes on both sides of the back bed surface and insert it, and tighten the fastening screws on both sides.

ZHEJIANG MEDITSTER MEDICAL DEVICE TECHNOLOGY CO., LTD

A comprehensive enterprise integrating R & D, design, intelligent manufacturing and sales of rehabilitation aids and medical device products.

Hangzhou Headquarters

Telephone:0571-87653297
Address: 5th Floor, Block C, Building 1, Kaichuang Technology Park,

No. 98, Liuzhe Street, Cangqian Street, Yuhang District,Hangzhou City,

Zhejiang Province

Shenzhen Operation Center

Telephone:400 0091 913
Address: 1703-1, Building 6, Tianan Yungu Industrial Park Phase II (08-07), Gangtou Community, Bantian Street, Longgang District, Shenzhen

Hengshui Operation Center

Telephone:0318-5201810
Address: 12th Floor, South of Thunder Building, Intersection of Zhonghua Street and Shengli Road, Taocheng District, Hengshui City, Hebei Province

Factory

Telephone:400 009 1913
Address: Medster Boutique Factory, Zhongkuang South Road, High-tech Industrial Development Zone, Jing County, Hengshui City, Hebei Province

Business License